In this blog post, we’ll be discussing the Dodge Ram neutral safety switch bypass. This is a simple mod that will allow you to bypass the neutral safety switch, which is located on the steering column. We’ll also go over some of the benefits of doing this mod, as well as some potential risks. So, if you’re thinking about bypassing your neutral safety switch, read on for more information!
What is a Neutral Safety Switch?
A neutral safety switch is a device that is used to prevent a vehicle from starting in either the forward or reverse gear. This switch is usually located on the transmission, and is intended to keep the vehicle from being accidentally put into gear when it is not running. The neutral safety switch prevents the engine from starting unless the transmission is in either Park or Neutral.
There are two main types of neutral safety switches: those that are mounted on the side of the transmission, and those that are built into the shifter assembly. The type of neutral safety switch that your vehicle has will depend on the year, make, and model of your vehicle.
If your vehicle was manufactured after 1985, it likely has a neutral safety switch that is built into the shifter assembly. This type of switch is also sometimes referred to as an interlock solenoid. The advantage of this type of switch is that it cannot be bypassed without first disconnecting the battery.
On the other hand, if your vehicle was manufactured before 1985, it likely has a side-mounted neutral safety switch. This type of switch can be bypassed without disconnecting the battery, but doing so may cause damage to your transmission. It is important to note that bypassing your neutral safety switch should only be done if absolutely necessary, and should never be done on a regular basis.
Relevant article: Cupped Tires: What Causes Them & How To Fix Them
What is the Dodge Ram Neutral Safety Switch Bypass?
The Dodge Ram Neutral Safety Switch Bypass is a device that bypasses the neutral safety switch in the vehicle. This allows the vehicle to be started without the need for the key, making it a great choice for those who want to avoid having to use the key. The bypass is simple to install and can be done in minutes.
How to Bypass the Neutral Safety Switch in a Dodge Ram
If your Dodge Ram won’t start in park or neutral, there may be an issue with the neutral safety switch. This switch is designed to prevent the engine from starting when the transmission is in gear, but if it’s not working properly, it can keep your engine from starting even when the transmission is in park or neutral. Luckily, there’s a way to bypass the neutral safety switch so you can get your engine running again.
To bypass the neutral safety switch in a Dodge Ram, you’ll need to locate the wiring harness that connects to the switch. Once you’ve found it, you’ll need to disconnect the wiring harness and connect it to a jumper wire. Then, simply connect the other end of the jumper wire to any ground point on the vehicle. This will bypass the neutral safety switch and allow your engine to start in park or neutral.
Keep in mind that bypassing the neutral safety switch can be dangerous if not done properly. Make sure you understand what you’re doing before attempting this fix.
Relevant article: Volvo 9c03 Code
Pros and Cons of bypassing the Neutral Safety Switch
When it comes to the Dodge Ram, one of the most popular trucks on the market, there are a few different ways that you can bypass the neutral safety switch. This can be done for a number of reasons, but it’s important to understand both the pros and cons before making a decision.
One of the biggest pros of bypassing the neutral safety switch is that it can allow you to start your truck in any gear. This can be useful if you’re stuck in a situation where you need to start in a higher gear, or if you accidentally left your truck in gear and can’t get it into neutral.
However, there are also some significant cons to bypassing the neutral safety switch. One of the most serious is that it can cause your truck to roll away if you’re not careful. This is because when the switch is bypassed, there’s nothing stopping your truck from moving forward or backward – even if you’re not in the vehicle. Another con is that bypassing the switch can put extra strain on your starter motor, which could lead to premature wear or failure.
So, should you bypass the neutral safety switch on your Dodge Ram? Ultimately, it’s up to you – but we recommend carefully weighing up the pros and cons before making a decision.
If you have a Dodge Ram and are having trouble with your neutral safety switch, then you may want to bypass it. This can be done easily with a few tools and some wire. It is important to note that this should only be done if you are having trouble with your neutral safety switch and not as a permanent fix. If you do bypass your neutral safety switch, be sure to keep an eye on your engine light so that you know if there are any other issues that need to be addressed.
Also, it is always best to consult a qualified mechanic before attempting any repairs.
I have a Dodge Ram myself and I recently encountered a problem with the neutral safety switch. After some research, I decided to bypass the switch and it worked perfectly. I was a bit worried about the potential risks but so far I haven’t experienced any issues. It is important to remember to stay vigilant when bypassing the neutral safety switch and keeping an eye on the engine light for any potential problems. Has anyone else had experience with this mod? What was your experience?